2. CONTROLS
3. OPERATION
OPERATION
1. Place the worklight
on a flat surface or
hold tightly.
3. Turn the worklight
on.
1. To turn the worklight on,
press the on/off switch
once.
2. To turn off, press the
on/off switch again.
2. Adjust the angle of the head
if required.
On/Off Switch
Adjusting the Head of the Torch
The LED worklight comes with an adjustable head so you can point
the light beam in many directions to increase versatility.
1. Gently pull or push the head to the desired angle.
WARNING!
NEVER STARE DIRECTLY AT THE
LIGHT SOURCE / LED.
Summary of Contents for ZLTLS-012
Page 4: ...ZLTLS 012...
