ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
8 AA Battery x 3
9 Wall Mount Bracket
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. INSTALLING BATTERIES
1 Angle Scale
2 Suction Cap Push Button
3 Power Button
4 90° Line Lasers
5 Angle Reference Point
6 Magnetic Base
7 Dual Spirit Levels
90° TILE LASER
ACCESSORIES
8
The Tile Laser unit requires 3 x AA batteries to operate.
1 Remove the battery
compartment lid from the base
of the laser unit using the tab.
3 Place the bottom of the battery
lid into the recess in the laser
unit and push the lid tab down
to secure in place.
2 Insert 3 x AA batteries in the
correct direction indicated
by the embossing inside the
battery compartment.
WARNING!
BEFORE INSTALLING BATTERIES, ENSURE
THE UNIT IS SWITCHED OFF TO PREVENT THE LASER
FROM OPERATING.
3
4
2
7
5
1
6
9
