TLR-090
4. OPERATING MODES
Using the Tile Laser for 45° or other angles
Using the Tile Laser on a wall
1 Position the tile Laser
against the surface in the
desired location.
Note:
This can be done by
mounting the unit with the wall
bracket or use of the suction
caps.
2 Press the on/off switch to
project the laser lines.
1 Align the angle reference
point with the edge of a tile
or horizontal line.
45°
2 Using the reference point as
a pivot, rotate the laser until
the line is aligned with the
desired angle on the scale.