2. WALL MOUNT BRACKET
3. CONTROLS
OPERATION
Switching On and Off
Spirit Levels
Magnetic Mounting
A wall mount bracket is included with your tile laser to allow you to
attach to a wall using a screw or nail.
1 Attach the mounting bracket to
a wall using a screw or nail. Be
sure that the head of the nail
or screw fits into the sunken
recessed side of the plate so
that both magnets on the base
connect firmly.
1 To turn the Tile Laser on, push
the on/off switch located ontop
of the unit.
The Tile Laser has 2
perpendicular spirit levels to
allow you to check if the unit is
perfectly horizontal or vertical.
The laser unit has magnets on
the base to allow mounting to
metal surfaces.
2 To turn the laser unit off, push
the on/off switch again.
2 Place the back of the laser
level onto the wall mount. Use
the spirt level to ensure your
projected lines are level.
WARNING!
ENSURE LASER WINDOW IS NOT AT
EYE LEVEL OR DIRECTED TOWARDS OTHERS
WHEN OPERATING.
Suction Cap Mounting
The laser unit has suction caps on the base and at the rear to allow
mounting to glass tiles or similar smooth surfaces.
1 Place Tile Laser against the
surface.
2 Press both suction cap
buttons to allow the suction
cups to mount.
