MAINTENANCE
DESCRIPTION OF SYMBOLS
STAPLE/ NAIL SELECTION
Common Applications for Staple Length
5/16”
(8mm)
Insulation, Upholstery, Weather Stripping,
Wall Decorations, Crafts, Covering Cornices,
Webbing, Light Fabrics.
3/8”
(10mm)
Insulation, Carpeting, Wire Mesh, Plastic
or Canvas Coverings, Roofing Paper, Felt
Stripping, Weather Stripping.
1/2”
(12mm)
Insulation, Carpet Underlay, Porch Screens,
Picture Frames, Wire Mesh, Netting, Roofing
Paper, Panelling.
9/16”
(14mm)
Ceiling Tile, Heavy Insulation, Insulation Board,
Trellises, Roofing, Carpeting.
Common applications: C1 Brads
9/16”
(15mm)
Trim Moulding, Panelling, Picture Frames,
Model Work, Any Finish Nailing Application.
TYPE 53 STAPLE SIZE
18 GAUGE C1 BRAD NAIL SIZE
The SNG-2050U accepts staples with the below
measurements
The SNG-2050U accepts nails with the below measurements
•
When not in use, the staple nail gun should be stored in a dry,
frost free location, keep out of children’s reach.
•
If the housing of the staple nail gun requires cleaning, do not
use solvents. Use of a cloth only is recommended. Never im-
merse any part of the staple nail gun into liquid.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by repair of the staple nail gun by an unauthorised
person or by mishandling.
8
10
12
14
Width
11.3mm
Depth
0.75mm
Front View
Side View
Width
2mm
Front View
15
1.2mm
8
10
12
14
Width
11.3mm
Depth
0.75mm
Front View
Side View
Width
2mm
Front View
15
1.2mm
Read instruction manual
Wear eye protection
Warning
ga
/min
Gauge
Impacts per minute
V
Volts
Hz
Hertz
ac/~ Alternating current
W
Watts
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
