4. OPERATING THE STAPLE NAIL GUN
Firing a Staple or Nail
2 Place the staple nail
gun against the work
surface so that the
nosepiece of the tool
is where you want the
staple/nail to be located.
Push the safety striker
pin and nosepiece down
onto the surface to be
fastened.
A staple or nail will only fire when the trigger is pressed if the safety
striker pin is pushed against the material to be fastened.
1 Switch the on/off switch into
the on position.
3 To fire the staple nail gun,
squeeze the trigger.
SNG-2050U
5. TROUBLESHOOTING
OPERATION
Jammed Staple Nail Gun
2 Using a pair of pliers, remove
any jammed staples or nails.
3 With the magazine still open,
tap the safety striker pin
against a surface to dislodge
any loose staples.
Note:
Be careful not to bend the end of the magazine. If this occurs the
unit will be inoperable.
1 Squeeze the magazine latches on either side of the tool and pull the
magazine out of the tool.
a
b
