ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. LOADING STAPLES
1 Hold the tool upside down.
This staple nailer only accepts Type 53 staples. Other types of staples,
including paper staples, will jam the unit.
3 Insert a row of staples into
the opening behind the
nose piece.
2 Squeeze the magazine latches on either side of the tool and pull the
magazine out of the tool.
4 Push the loaded magazine back into the unit until it clips into place.
a
b
Note:
Rows of staples longer than 120mm do not fit in the staple nail
gun.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1 Safety Striker Pin
2 Nose Piece
3 Magazine Window
4 Trigger
5 Sure Grip Handle
6 Magazine Latch
7 On/Off Switch
8 Power Cord
ELECTRIC STAPLE NAIL GUN
1
9
10
3
5
7
2
4
6
8
9 Staples x 1500
10 Nails x 100
ACCESSORIES
CAUTION!
ENSURE THE TOOL IS SWITCH OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING THE FOLLOWING PROCEDURES.
