2. DOCKING STATION
3. CHANGING DRIVER BITS
Charging with the Docking Station
1 Remove the USB charging
adaptor from the base of
docking station.
The docking station allows neat and tidy storage of the screwdriver bits,
while ensuring your screwdriver is always charged and ready to go.
3 Plug the charging jack into the
charging point on the docking
station.
5 The docking station indicator
lights illuminate in sequence,
indicating the tool is charging.
2 Plug the USB charging cable
into a USB portable charge
pack (not included) or USB
port.
4 Place the screwdriver / torch
onto the docking station to
allow the tool to charge.
6 When the tool is completely
charged, all 4 indicator lights
will illuminate.
Inserting Driver Bits
Removing Driver Bits
1 Insert the CRV bit directly into
the magnetic bit holder.
1 Pull the CRV bit out of
the magnetic bit holder to
remove.
2 Pull gently on the
CRV bit to ensure
it is properly
secured.
