MAINTENANCE
TROUBLESHOOTING
On/Off Trigger is Locked
Ensure that the forward / reverse lever is in the correct position; pressed left for
forwards direction, pressed right for backwards direction. If it is in between the two
settings the on/off trigger will be locked.
LED Torch is Not Working
The tools battery may be depleted. Charge the tool using the USB charger
provided.
The Handle Is Not Rotating
Ensure you are holding the handle lock button down while rotating the handle.
Ensure you are rotating the handle in the correction direction. Clockwise rotation
into in-line position or anti-clockwise for angled position.
Tool is Not Charging When Placed Onto The Docking
Station
Ensure that you have connected the docking station to a suitable USB port using
the USB charging cable provided.
Ensure the tool is correctly seated in the docking station.
SPARE PARTS
1. When not in use, the screwdriver should be stored in a dry, frost
free location, keep out of children’s reach.
2. Keep ventilation slots of the screwdriver clean at all times and
prevent any debris from entering.
3. If the housing of the screwdriver requires cleaning, do not use
solvents but cloth only.
4. Blow out the ventilation slots with compressed air periodically .
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by repair of the screwdriver by an unauthorised
person or by mishandling of the tool.
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
