background image

size 445 x 210 mm

Danger!

 - Read the operating instructions to re-

duce the risk of inquiry

Caution!  Wear ear-mu

 s.

 The impact of noise 

can cause damage to hearing.

 Caution! Wear safety goggles. 

Sparks gene-

rated during working or splinters, chips and dust 

emitted by the device can cause loss of sight.

 

The reprinting or reproduction by any other me-

ans, in whole or in part, of documentation and 

papers accompanying products is permitted only 

with the express consent of the iSC GmbH. 

 Subject to technical changes

SDA-1100U

GB

   Additonal operating & safety instructions 3.6V Lock & Load Screwdriver

 Service information

We have competent service partners in all countries named on the guarantee certi

fi

 cate whose contact 

details can also be found on the guarantee certi

fi

 cate. These partners will help you with all service re-

quests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the 

following parts are therefore also required for use as consumables.

Category

Example

Wear parts*
Consumables*

Bit inserts

Missing parts

* Not necessarily included in the scope of delivery!

In the e

 ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-

se ensure that you provide a precise description of the problem and answer the following questions in all 

cases:

• 

Did the equipment work at all or was it defective from the beginning?

• 

Did you notice anything (symptom or defect) prior to the failure?

• 

What malfunction does the equipment have in your opinion (main symptom)?  

Describe this malfunction.

 Yang/Product-Management

Weichselgartner/General-Manager

explains the following conformity according to EU directives and norms for 

the following product

3.6V Lock & Load screwdriver SDA-1100U / Charger for SDA-1100U (Ozito)

   2014/29/EU 

 2005/32/EC_2009/125/EC 
 2014/35/EU 
 2006/28/EC 

X  2014/30/EU 

 2014/32/EU 
 2014/53/EC 
 2014/68/EU 
 90/396/EC_2009/142/EC 
 89/686/EC_96/58/EC 

X  2011/65/EU

 X  2006/42/EC

 Annex IV

Noti

fi

 ed Body:

Noti

fi

 ed Body No.:

Reg. No.:

 2000/14/EC_2005/88/EC

 Annex V

 Annex VI

 Noise: measured L

WA

 =  dB (A); guaranteed L

WA

 =  dB (A)

P =  KW; L/Ø =  cm

Noti

fi

 ed Body:

 2004/26/EC

Emission No.:

Standard references:  EN 60745-1; EN 60745-2-2; EN 55014-1; EN 55014-2;

EN 61000-3-2; EN 61000-3-3; EN 60335-1; EN 60335-2-29; EN 62233

Landau/Isar, den 01.06.2016

First CE: 16  

 

Archive-File/Record:

 NAPR014392

Art.-No.:

 44.722.80 

I.-No.: 11016 

Documents registrar:

 R. Gehard

Subject to change without notice

 

Wiesenweg 22, D-94405 Landau/Isar

 ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

Declaration of con

fi

 rmity

Summary of Contents for SDA-1100U









Reviews: