![background image](http://html.mh-extra.com/html/ozito/sda-1100u/sda-1100u_original-instructions-manual_1666545004.webp)
1. Select the desired driver bit
2. Hold the screwdriver firmly and place the bit on the screw to be
fastened.
3. Squeeze the trigger in the correct position to operate the driver in
the desired rotational direction.
4. Fasten the screw into the workpiece.
Note: Do not force the screwdriver or apply side pressure to elongate
the hole. Let the screwdriver do the work.
SDA-1100U
4. CONTROLS
5. SCREWDRIVING
Forward / Reverse Trigger
1. Squeeze the bottom section of the trigger for forward rotation.
2. Squeeze the top section of the trigger for reverse rotation.
OPERATION
FOWARD
4
REVERSE
FORWARD
REVERSE