2. CHANGING THE BIT CARTRIDGE
3. LOADING A DRIVER BIT
Removing Bit Cartridge
1. Push the bit cartridge from the right side of the screw driver so that
the cartridge slides out from the body of the screwdriver.
Installing Bit Cartridge
1. Align the D-shape on the back of the bit cartridge with the gap in
the left hand side of the screwdriver so that the arrow is horizontal.
2. Push the cartridge into the screwdriver until it clicks into place
Note:
Do not force the cartridge into place. If it doesn’t slide in
easily try realigning by repeating step 1.
Selecting Driver Bits
Note: The bit cartridge must be already installed in order to select a
driver bit.
Loading Driver Bits
1. Press down on the loading switch
2. Slide the switch forward so that the bit is pushed into the bit holder
Unloading Driver Bits
1. Press down on the loading switch
2. Slide the switch backward so that the bit retracts from the bit holder
4
1. Look through the bit view
window to see the driver bit
that is selected.
2. Rotate the cartridge until the
required driver bit can be seen
through the view window
