8
REMOVAL AND INSTALLATION OF ACCESSORIES (cont.)
High speed cutter, Diamond wheel point and Drill:
Material
Speed setting
Stone, shell
MAX
Steel
3
Aluminium, brass 6
Plastic
1
Abrassive disc:
Material
Speed setting
Steel
5
Aluminium, brass 3
Plastic
5
Flexible Shaft
Warning!
Disconnect the plug from the power source before assembling, making
any adjustments or changing accessories. Such preventive safety measures reduce
the risk of starting the tool accidentally.
Your rotary tool is provided with a flexible shaft to give you greater comfort and
control for precision work.
Unscrew the shaft collar from the rotary tool. Insert the flexible shaft into the collet
chuck, engage the spindle lock and tighten the collet chuck. Screw the silver flexible
shaft cover onto the body of the rotary tool. To insert accessories into the end of the
flexible shaft insert the bent pin into the hole at the end of the flexible shaft this acts
as a spindle lock, use the wrench to install and remove the accessories as described
above.
Note:
Remove the bent pin from the hole prior to starting the rotary tool.
