9
REMOVAL AND INSTALLATION OF ACCESSORIES (cont.)
Desk Stand and Extension Rod
The desk stand will clamp to your desk or bench, once clamped screw the
extension rod into the desk stand. To extend the rod turn it counter clockwise,
once it is extended as far as required turn the rod clockwise to lock into place.
Once the desk stand and extension rod are mounted you can hang your rotary
tool on the hook at the top of the rod, this will keep your work area neat and tidy.
•
Keep the ventilation slots of the rotary tool clean at all times and prevent any
foreign matter from entering.
•
Blow out the unit through the rear ventilation slots with compressed air
periodically to ensure a dust free area around the switch.
•
The carbon brushes and commutator in your tool have been engineered for
many hours of dependable service. To maintain peak efficiency of the motor,
we recommend the brushes be examined every two to six months. Worn
brushes will need to be replaced. Replace both at the same time.
Note:
Ozito Industries will not be responsible for any damage or injuries caused
by the repair of the rotary tool by an unauthorised person or by mishandling of
the tool.
MAINTENANCE
