With the spindle lock engaged use the wrench provided to loosen the collet nut.
Insert the accessory into the collet nut as far as possible; this will limit runout of the
accessory. With the spindle lock engaged finger tighten the collet nut until the
accessory shank is gripped by the collet. Tighten the collet nut further with the
wrench. Do not over tighten the collet nut.
To remove accessories reverse the above procedure.
Make sure the collet matches the shank size of the accessories you plan to use.
Warning!
Do not use grinding wheels over 1” (25.4mm) in diameter.
The high speed of the tool can cause larger wheels to fly apart and could cause injury.
Grinding Stones
When using a grinding stone the first time, use the dressing stone to balance it.
The dressing stone can also be used for cleaning the surface or to give the
grinding stone a special shape.
Material
Speed setting
Stone, shell
1
Steel
5
Aluminium, brass 2
Plastic
1
Felt wheels and tip:
The felt wheels or tip should be screwed on the mandrel.
Material
Speed setting
Steel
5
Aluminium, brass 3
Plastic
5
Sanding bands and disc:
Material
Speed setting
Stone, shell
6
Steel
1
Aluminium, brass 3
Plastic
1
REMOVAL AND INSTALLATION OF ACCESSORIES (cont.)
7