![background image](http://html1.mh-extra.com/html/ozito/pxjbs-018/pxjbs-018_instruction-manual_1666210003.webp)
a
b
a
b
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
2. INSERTING & REMOVING THE BATTERY
3. CONTROLS
OPERATION
Inserting the Battery
1. Align the ribs of the battery
with the recess in the rear
of the jet blower and push in
until it clicks into place.
WARNING!
BEFORE INSERTING THE BATTERY
ENSURE THE TOOL IS SWITCHED OFF.
Removing the Battery
1. Press and hold the battery release tab (a) and then slide the battery out
(b).
WARNING!
DO NOT SWITCH THE JET BLOWER ON
IN ENCLOSED OR POORLY VENTILATED SPACES
OR IN THE PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES AND POWDERS.
Switching On & Off
•
When the on/off switch is
pressed into the housing
on the right - ON position,
the jet blower will be
switched on and the air
velocity will be at its
lowest level.
•
When the on/off switch is
pressed into the housing
on the left - OFF position,
the jet blower will be
switched off . Always use
this position when you are
not working with the jet
blower.
Speed Control
•
Switching on the jet blower,
the air velocity will be at its
lowest level.
•
You can increase the air
velocity by pressing the
SPEED button. Each bar on
the display will illuminate
according to the air velocity
selected. Up to 4 bars can be
selected for the highest air
velocity.
Note:
If you press the SPEED push button again when the highest air
velocity is active, the equipment will return to the lowest air velocity.
Note:
To minimize noise and prolong battery operating time, always use
the speed which is actually required and never run at a speed which is
faster than necessary.