Read instruction manual
Do not use in the rain or leave the blower outdoors while raining.
Keep bystanders away. Do not operate whilst people especially
children or pets are in the area.
Wear eye and ear protection.
Regulator compliance mark
Keep hands out of the openings while the tool is running
Sound pressure level
104
MAINTENANCE
DESCRIPTION OF SYMBOLS
Power tools that are no longer usable should not be disposed
of with household waste but in an environmentally friendly
way. Please recycle where facilities exist. Check with your local
council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in the
environment. Please recycle packaging where facilities exist.
Check with your local council authority for recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, visit www.ozito.com.au or
contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Cleaning
• Keep air intake clean and air vents free of debris to avoid overheating
the motor.
• Do not use cleaning agents to clean the plastic parts of the tool.
• A mild detergent on a damp cloth is recommended. Water must never
come into contact with the tool.
• If the jet blower vibrates abnormally, stop motor immediately. Abnormal
vibration usually indicates a mechanical problem continued operation
could lead to injury or damage.
• No lubrication is necessary as the motor is equipped with lifetime-
lubricated bearings.
• Never allow any liquid to get inside the tool, never immerse any part of
the tool into liquid.
Storage
When not in use, the tool should be stored in a dry, frost free location, keep
out of children’s reach.
The Brushless Jet Blower is equipped with a
integrated wall holder, this enables it to be
easily hung on a wall.
Note:
Ozito Industries will not be responsible for any damage or injuries
caused by repair of the tool by an unauthorised person or by mishandling.
This tool is designed for DIY use - use in commercial or industrial
environments will void the warranty.
Problem Cause
Remedy
Blower is not
starting
Battery is low in charge.
Charge battery
Battery not inserted
properly.
Insert battery pack correctly.
Blower is not
operating at
full capacity
Speed Control set low.
Inspect variable speed dial and
increase as necessary.
Motor stops
while blowing
Battery has no power.
Charge battery.
Turbo boost
will not
operate.
Battery fitted are 1.5Ah
or 2.0Ah.
Insert battery 2.5Ah, 3.0Ah, 4.0Ah or
5.2Ah.
TROUBLESHOOTING
