WARNING!
ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
2. DEPTH ADJUSTMENT
3. BEVEL ADJUSTMENT
Depth should be adjusted so that no more than one tooth is protruding
through the timber. This helps to minimise splintering.
Depth Adjustment
Bevel Adjustment
2 Hold the baseplate
down with one
hand. Raise or
lower the saw to
the desired depth.
2 Align baseplate to
desired angle on
bevel scale.
1 Loosen the depth adjustment
lever.
1 Loosen bevel adjustment knob.
3 Tighten depth adjustment knob to
secure in place.
3 Tighten the bevel adjustment
knob.
