ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
The blade cover protects the blade
when not in use. Simply slide it
off the blade before use. Once
finished operating, place the cover
back over the blade.
Attach the safety guard
onto the hedge trimmer
before use. Fit and
tighten the supplied
screws on either side to
hold in place.
Blade Cover
Safety Guard
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING!
NEVER USE THE HEDGE TRIMMING
UNLESS THE SAFETY GUARD IS FITTED.
WARNING!
NEVER START THE HEDGE TRIMMER
WHILE THE BLADE COVER IS FITTED.
11. Blade Cover
ACCESSORIES
1
9
2
3
4
5
6
7
8
1. Rotating Rear Handle
2. Rear Handle Lock x 2
3. Safety Switch
4. Front Handle
5. Safety Guard
6. Blade
7. Impact Guard
8. Battery Seating
9. On/Off Trigger
10. Front Handle Lock
CORDLESS HEDGE TRIMMER
WARNING!
WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES.
DO NOT PLACE YOUR HAND OR FINGERS BETWEEN
BLADES OR IN ANY POSITION WHERE THEY COULD
GET PINCHED OR CUT. NEVER TOUCH BLADES
OR SERVICE THE UNIT WITH THE BATTERY PACK
INSTALLED.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from Ozito
Power X Change Range.
10
11
