4. PRE-START PROCEDURE
OPERATION
NOTE:
THE PUMP REQUIRES A MINIMUM WATER
SUPPLY OF 15L/MIN AT 20PSI TO AVOID DAMAGING
THE PUMP DUE TO INSUFICIENT WATER SUPPLY.
1. Ensure water
supply is
connected.
2. Ensure water supply is
turned on.
3.
Squeeze trigger on the gun until there is a steady flow of water
from the nozzle.
Water Supply
4. Run water through
your garden hose
to remove any
foreign matter before
attaching to the
pump..
5. Attach garden hose to the inlet on the pump.
Note:
A plastic filter is fitted to the inlet preventing any debris
from entering the pump. Inspect and clean the filter before use as
insufficient water supply could damage the pump.
Spray Nozzles
6. Pull back and hold
quick connector on
lance.
4. Check that oil and fuel tanks
are full.
Jet
40°
Wide
Fan
15°
Narrow
Fan
Low
Pressure
Detergent
a
b
7. Insert a spray nozzle (a) and
release quick connector (b).
Note:
Ensure correct fitment to
prevent nozzle being forced out of
the connector by water pressure.
Note:
The trigger can be locked
to prevent accidental spraying.
Disengage trigger lock before
squeezing the trigger.
1
