ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. Lance
2. Gun
3. Air Filter
4. Choke
5. Recoil Starter
6. Throttle
7. Fuel Shut Off
8. Fuel Tank
9. Fuel Cap
10. On/Off Switch
11. Oil Filler Cap
12. Water Inlet
13. Spray Nozzles
14. High Pressure Hose
15. Rubber Wheels
16. Spark Plug Spanner
17. Screwdriver
18. Cleaning Needle
19. Breather
MOBILE PETROL WATER BLASTER
ACCESSORIES
1. ASSEMBLY
a
b
1. To attach the
wheels first
align button (a)
with the hole in
the axle.Press
and hold button
(a), then insert
into axle (b).
3. Attach the spray
gun holder using
2 phillips head
screws and nuts
provided.
4. Attach the high
pressure hose
holder using
2 phillips head
screws and nuts
provided.
6. Attach the breather, carefully tighten
by hand.
Note:
When not in use or transporting,
remove breather and refit hex bolt.
2. Attach the handle
using 2 phillips
head screws and
nuts provided.
5. To attach the breather first
unscrew the hex bolt using 14mm
spanner. Do not discard.
1
