!!
General Power Tool Safety Warnings - Personal Safety
6
!!
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
b) If the supply cord is damaged,
it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS
FOR YOUR BATTERY CHARGER.
•
Before using the charger, read all instructions and cautionary markings on charger,
and the pruner.
Danger!
If the pruner housing is cracked or damaged, do not insert the
charger plug into the pruner. There is a danger of electric shock or electrocution.
•
This charger is not intended for any uses other than charging rechargeable
batteries. Any other use may result in risk of fire, electric shock or electrocution.
•
Do not place any object on top of the charger or place the charger on a soft
surface that may result in excessive internal heat. Place the charger in a position
away from any heat source.
•
To reduce risk of damage to the electric plug and cord, pull by the plug rather
than the cord when disconnecting the charger.
•
Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
•
An extension cord should not be used unless absolutely necessary. Use of an
improper extension cord could result in the risk of fire, electric shock or electrocution.
•
Do not operate charger if it has received a sharp blow, been dropped or otherwise
damaged in any way. Have it checked by an electrician or power tool repairer.
•
Do not disassemble charger. Take it to an electrician or power tool repairer when
service or repair is required. Incorrect reassembling may result in a risk of electric
shock, electrocution or fire.
•
To reduce risk of electric shock, unplug charger from the outlet before attempting
any cleaning.
•
Never attempt to connect 2 chargers together.
Battery Safety Warnings
!!
Summary of Contents for PRL-072
Page 1: ......
