FWD
REV
5. DRILLING
FWD
REV
PXRHS-300
Before starting to drill, perform a few simple checks.
3 Ensure workpiece is clamped and secured where possible.
1. Depress and release the variable
speed trigger to ensure it is not
locked on.
4. Hold the drill firmly and place the
bit at the point to be drilled.
2. Check the forward/reverse lever
is on desired setting.
5. Depress the variable speed
trigger to start the drill.
6. Move the drill bit into the workpiece.
Note:
Do not force the drill or apply side pressure to elongate the hole. Let
the drill do all the work.
Forward/ Reverse Lever
Variable Speed Trigger
1. For forward rotation, push the fwd/rev lever towards the left side of the drill. For
reverse rotation push fwd/rev lever to the right.
1. To start drilling squeeze the variable
speed trigger.
2. To stop drilling release the trigger.
Note:
The more the variable speed trigger is depressed, the faster the drill bit will
rotate.
