3
Congratulations on purchasing an Ozito Metal Cut-Off Saw.
We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years.
Your Metal Cut-Off Saw OZMCS2000WB has been
designed for the easy cutting of metal. It is intended
for DIY use only.
Warning!
When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the
tool off, in an emergency, before operating the tool.
Save these instructions and other documents supplied with this machine for
future reference.
The electric motor has been designed for 230V and 240V only. Always check that
the power supply corresponds to the voltage on the rating plate.
Note:
The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.
This tool is earthed in accordance with AS/NZS3100:2002+A1+A2+A3.
If the supply cord is damaged, it must be replaced by an electrician or a power tool
repairer in order to avoid a hazard.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of
an extension lead not suitable for the power input of the tool or which is damaged
or defective may result in a risk of fire and electric shock.
INTRODUCTION
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
!!
