TOOL OPERATION (cont.)
•
When drilling into iron or steel use a cooling lubricant such as thin oil. With
aluminium use turpentine or paraffin. With brass, copper and cast iron use no
lubricant but withdraw the drill regularly to assist cooling.
Wood Drilling
•
Mark the place where you want to drill with a punch or nail.
•
To avoid splintering on breakthrough either clamp a piece of scrap wood to the
back of the wood or continue the hole from the back of the wood when the drill
bit first breaks through.
•
When not in use the drill should be stored in a dry, frost free location not within
the reach of children.
•
Keep ventilation slots of the drill clean at all times and prevent any foreign matter
from entering.
•
If the housing of the drill requires cleaning do not use solvents but a moist soft
cloth only.
•
Blow out the ventilation slots with compressed air periodically .
Note:
Ozito Industries will not be responsible for any damage or injuries caused by
repair of the sander by an unauthorised person or by mishandling of the tool.
11
AUSTRALIA (Head Office)
5 Chestnut Crt, Dingley, Victoria, Australia, 3172
Telephone: 03 9558 3999
Facsimile: 03 9558 0583
www.ozito.com.au
1 X OZCD12V1A Cordless Drill
1 X 12V Battery
1 x 240V Charging Adaptor & Cradle
1 x Double-ended Screwdriver Bit
1 X Instruction Manual
OZITO INDUSTRIES PTY LTD
CONTENTS
MAINTENANCE AND CARE
