5
GENERAL (cont.)
5. Head protection.
Always use safety glasses. Use a face or dust mask whenever the
operations may produce dust or flying particles. Wear ear protection whenever the
sound level seems uncomfortable.
6. Guard against electric shock.
Prevent body contact with earthed or grounded
surfaces (e.g. pipes, radiators, cookers and refrigerators).
Electric safety can be further improved by using a high sensitivity
(30 mA/30 mS) residual current device (RCD).
7. Do not overreach.
Keep proper footing and balance at all times.
8. Stay alert.
Watch what you are doing. Use common sense. Do not operate the
tool when you are tired.
9. Secure work piece.
Use clamps or a vice to hold the work piece; it is safer as it
frees both hands to operate the tool.
10. Connect dust extraction equipment.
If devices are provided for the connection
of dust extraction and collection facilities, ensure that these are connected and
properly used.
11. Remove adjusting keys and wrenches.
Always check that adjusting keys and
wrenches are removed from the tool before operating the tool.
12. Extension leads.
Before use inspect the extension leads and replace if damaged.
When using the tool outdoors, only use extension leads intended for outdoor use
and marked accordingly.
13. Use appropriate tool.
The intended use is described in this instruction manual.
Do not force small tools or attachments to do the job of a heavy duty tool. The
tool will do the job better and safer at the rate for which it was intended. Do not
force the tool.
Warning!
The use of any accessory or attachment, or performance of any
operation with this tool other than those recommended in this instruction manual
may present a risk of personal injury.
14. Check for damaged parts.
Before use carefully check the tool and power lead for
damage. Check for misalignment and seizure of moving parts, breakage of parts,
damage to guards and switches and any other conditions that may affect its
operation. Ensure that the tool will operate properly and perform its intended
function. Do not use the tool if any parts are damaged or defective. Do not use
the tool if the switch does not turn it on and off. Have any damaged or defective
parts repaired or replaced by an electrician or power tool repairer. Never attempt
any repairs yourself.
15. Unplug the tool.
Unplug the tool when it is not in use, before changing any parts
of the tool, accessories or attachments and before servicing.
16. Avoid unintentional starting.
Do not carry the tool with a finger on the on/off
switch. Make sure the tool is switched off when plugged in.
