Attaching The Camera Shaft
1. Align the key in the base of
the camera shaft with the slot
in the handle unit.
2. Push the two parts together
firmly.
3. Twist the threaded collar clockwise onto
the camera shaft base to lock it in place.
Extending The Display
The display unit can be plugged into a larger screen for easier
viewing when required.
1. Plug the black 3.5mm TS plug
of the AV cable into the video
output port.
2. Plug the yellow RCA plug of
the AV cable into the yellow
AV input on your desired
display unit.
3. Follow the display unit
manufacturer’s instructions for
viewing AV inputs.
Attaching Accessories
The supplied tools can be attached to the end of the camera shaft
and used to recover objects in narrow, inaccessible spaces.
The magnet tool can be used to pick up
ferrous objects such as nails and screws that
have fallen into crevices.
The mirror tool can be used to look around
bends and corners in tubes.
The shaft of the mirror tool can be adjusted if
there is some misalignment.
The single and double hooks can be used to
lift non-magnetic objects such as rings and
bolts.
1. To attach any of the
accessories, slide one of the
accessory collars around the
desired tool.
2. Insert the small hook into the
hole on the end of the camera
shaft.
2. Slide an accessory collar over the end
of the tool and camera shaft. Ensure
the tool is aligned with the channel in
the accessory collar.
3. Check that the accessory is installed correctly by tugging gently on
it.
4. To remove the accessory, slide off the collar and pull the hook out
of the hole in the camera shaft.
2. DISPLAY
3. ACCESSORIES
a.
b.
ODIC-4810
