![background image](http://html1.mh-extra.com/html/ozito/odic-4810/odic-4810_instruction-manual_1666146004.webp)
MAINTENANCE
Cleaning
Clean the appliance regularly with a damp cloth. Do not use cleaning
agents or solvents; these may be aggressive to the plastic parts in
the appliance. Ensure that no water can get into the interior of the
appliance.
Use a microfibre cloth and a small amount of lens cleaner to clean the
camera lens.
Storage
Switch off the tool, place it in the storage bag and store it in a dry
location which is not accessible to unauthorised persons. Remove the
batteries before storage if the tool will not be in use for a long time.
WARNING!
BEFORE CLEANING YOUR TOOL OR
CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT THE POWER SUPPLY HAS BEEN
REMOVED OR DISCONNECTED TO PREVENT
ACCIDENTAL STARTING.
DESCRIPTION OF SYMBOLS
Warning
V
Volts
mm
m
Millimetre
°
IP67
Alternating Current
Metre
Regulatory Compliance Mark
(RCM)
Protection against dust ingress &
water up to 1m
Read Instruction Manual
Power tools that are no longer usable should not be
disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in
the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling
advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
Switching The Camera On & Off
1. Press and hold the power
button for 3 seconds to
switch the unit on. The power
indicator will light up and
the LCD screen will start
displaying real-time imagery.
2. Press the power button again briefly to switch the unit off.
Adjusting The LCD Display Contrast
The LCD display has 8 contrast levels to
make viewing easier onscreen. Press the
screen contrast button to cycle through the
levels.
Adjusting The Camera LED Brightness
The camera also has an LED light that can
be adjusted to make viewing in dark spaces
easier. Press the LED brightness button to
cycle through the brightness levels.
Note:
The LED can also be switch off when
not required by pressing the LED brightness
button until the settings bar onscreen is
empty.
Image Adjustment (Rotate, Mirror, Zoom)
The real-time monitoring displayed onscreen can be rotated 180° and
/or mirrored if required. Press the rotate button to toggle through the
view settings.
The image can also be zoomed in on by
holding down the screen contrast and rotate
buttons for 3 seonds to change the zoom
level. The image will cycle between 0x, 1.5x
and 2x zoom.
4. CONTROLS
OPERATION
PRESS
& HOLD
PRESS
& HOLD
NORMAL
MIRROR
180°
ROTATION
ROTATION
& MIRROR