![background image](http://html.mh-extra.com/html/ozito/ocba-1000/ocba-1000_instruction-manual_1666788005.webp)
CLAMPS
CRANKING
CHARGING
LOW VOLTAGE
CLAMPS
CRANKING
CHARGING
LOW VOLTAGE
•
CLAMPS
CRANKING
CHARGING
LOW VOLTAGE
•
Cleaning
• We recommend that you clean the device immediately each time
you have finished using it.
• Keep the battery & alternator tester dry, clean and free from oil,
water and grease.
• Clean the appliance regularly with a cloth. Do not use cleaning
agents or solvents; these may be aggressive to the plastic parts
in the appliance. Ensure that no water can get into the interior of
the appliance.
Storage
•
The battery & alternator tester should be placed in a dry room
for storage.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the tool by an unauthorised person
or by mishandling of the tool.
WARNING!
BEFORE CLEANING THE APPLIANCE MAKE
SURE THAT IT IS DISCONNECTED FROM THE VEHICLE.
Power tools that are no longer usable should not
be disposed of with household waste but in an
environmentally friendly way. Please recycle where
facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and
raw materials. Reuse of recycled material decreases
pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council
authority for recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk at your
local Bunnings Warehouse.
For further information visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
MAINTENANCE
3. BATTERY ANALYSIS (cont.)
OPERATION (cont.)
Testing the Charging System
With the battery terminal clamps correctly connected and before having
your assistant start the engine, turn off all vehicle accessory loads such as
lights, air conditioning, radio etc.
1. Have your assistant start the engine.
2. Press the "DOWN" button to select the
system test CHAR.
3. With CHAR on the digital display, press
"enter" button to read the voltage of the
battery.
4. When the test is complete, the digital
display will show the lowest and highest
charging voltage during test. The test
result LED will also illuminate.
–Green LED =
When charging system is ok
– Charging Error LED =
When charging
system is abnormal, generator output
voltage may be higher, lower or no output.
5. Turn engine off before disconnecting from the vehicle battery.