BATTERY
TESTER
CLAMPS
CRANKING
CHARGING
LOW VOLTAGE
12V BATTERY & ALTERNATOR TESTER
KNOW YOUR PRODUCT
1. KNOW YOUR PRODUCT OVERVIEW
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
1. Digital Display
2. Error LED’s
3. Test Result Red LED
4. Test Result Yellow LED
5. Test Result Green LED
6. Red Positive (+) Terminal Clamp
7. Black Negative (-) Terminal Clamp
8. Up Button
9. Back Button
10. Down Button
11. Enter Button
4
5
1
2
9
6
7
8
10
1. Digital Display
Indicates voltage, CCA, general battery condition and test results.
2. Error LED’s
– Low Voltage:
Indicates that the battery has a low voltage and should be
charged.
– Clamps:
Indicates the terminal clamps of the battery & alternator tester
are not properly engaged with the vehicle battery. Ensure that the
vehicle battery terminals and the terminal clamps are clean of grease
and dust. Ensure the clamps are well engaged with the battery.
– Cranking:
The starting system is abnormal and difficult to start.
– Charging:
The charging system is abnormal, generator output voltage
may be higher, lower or no output.
3. Test Result Red LED
–
Battery Test:
Battery is bad and should be replaced.
4. Test Result Yellow LED
– Battery Test:
Battery is weak.
5. Test Result Green LED
– Battery Test:
Battery is ok.
– Charging Test:
Charging system is ok.
– Cranking Test:
Starting system is ok.
6. Red Positive (+) Terminal Clamp
Connects to the positive (+) pole on your vehicle 12V battery.
7. Black Negative (
–
) Terminal Clamp
Connects to the negative (–) pole on your vehicle 12V battery.
8. Up Button
Scrolls up through menu items.
9. Back Button
Returns to previous menu.
10. Down Button
Scrolls down through menu items.
11. Enter Button
Confirms a selection (or action) from a menu item.
SETUP & PREPARATION
11
3
