Ozito OBLTHTC-018 Page 12 Instruction Manual Download

Page: 12 / 22

5. MAINTENANCE

6. TROBLESHOOTING

MAINTENANCE

WARNING!

ALWAYS ENSURE THE TOOL HAS

COMPLETELY STOPPED AND THE BATTERY IS REMOVED

PRIOR TO ANY MAINTENANCE.

1. Place the big hole in the

blade onto the blade mount

on the bottom of the blade

holder.

3. To remove the blade push

the blade towards the

centre of the spindle and

then slide off.

2. Pull the blade

outwards so that the

small hole is fitted

into the mount.

Attaching a Blade

Problem Cause

Remedy

Trimmer is

not starting

Possible clogging

Clean the cutter head of any grass.

Battery is low in

charge

Charge battery

Battery not inserted

properly

Insert battery pack correctly

Trimmer

is not

operating

at full

capacity

Possible clogging

Clean the cutter head of any grass.

Cutting tall grass at

ground level.

Make several passes from top

down.

Motor

stops while

operating

Battery has no power

Charge battery

Grass

wraps

around the

shaft and

trimmer

head.

Cutting tall grass at

ground level.

Make several passes from top

down.

Summary of Contents for OBLTHTC-018























Search results

Summary of Contents for OBLTHTC-018

Reviews:

Related manuals for OBLTHTC-018

Brands by name

Popular brands

Ozito OBLTHTC-018, Instruction Manual

Search results

Summary of Contents for OBLTHTC-018

Reviews:

Related manuals for OBLTHTC-018

Brands by name

Popular brands