INTRODUCTION
3
WARNING!
When using mains-powered equipment, basic safety
precautions, including the following, should always be followed to reduce
risk of fire, electric shock, personal injury and material damage.
Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference.
The electric motor has been designed for 230V and 240V only. Always check that
the power supply corresponds to the voltage on the rating plate.
Note:
The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use
of an extension lead not suitable for the power input of the tool or which is
damaged or defective may result in a risk of fire and electric shock. It is
recommended that the extension lead is a maximum of 25m in length. Do Not use
multiple extension leads.
Congratulations on purchasing an Ozito Metal Cut-Off Saw. We
aim to provide quality tools at an affordable price. We hope you
will enjoy using this tool for many years.
Your Metal Cut-Off Saw MCS-355 is used for cutting steel such as
pipe, box section, rectangular, angle iron and steel bars. The saw
can cut at angles from 0 to 45º left & 0 to 30º right, it features a
three position fence that permits an extended cutting range. The
quick release vice allows fast adjustment whilst the lock-off button
prevents accidental operation. It is intended for DIY use only.
!!
ELECTRICAL SAFETY
Summary of Contents for MCS-355
Page 1: ......