2. ADJUSTMENTS
3. EXTENSION CORD RETAINER
3. Once the desired
cutting depth is
selected, tighten the
depth adjustment
locking knob to secure
in place.
Note:
Ensure the lug
on the guide wheel arm
is correctly located into
a preset depth position
before tightening.
3. Once fitted, connect the extension lead socket to the lawn
edger power cord plug.
1. Loosen the depth
adjustment locking
knob until the guide
wheel arm moves
away from the
housing. This will allow
the cutting depth to be
adjusted.
1. Make a loop with the extension lead (socket end of lead),
push it through the square hole beneath the handle.
The lawn edger provides 3 cutting depths; 15, 25 and 38mm.
The cord retainer prevents the extension lead (not included)
from being disconnected during use. Only use Heavy Duty
extension lead suitable for outdoor use with electric garden
tools, no longer than 25 meters.
2. Raise the guide
wheel cutting arm to
increase the depth
or lower to decrease
the depth.
2. Place the loop onto the cord retainer and ensure it is pulled
firmly to secure in place.
Adjusting the Cutting Depth
Adjusting the Front Handle
1. Loosen the locking knob,
then slide the handle into the
most comfortable position.
Retighten the locking knob
when in position.
