MAINTENANCE
DESCRIPTION OF SYMBOLS
TROUBLESHOOTING
Note:
The LED light is not replaceable.
•
When not in use, the tool should be stored in a dry, frost free
location, keep out of children’s reach.
•
If the housing of the tool requires cleaning, do not use solvents
but cloth only.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by repair of the tool by an unauthorised person or by
mishandling of the tool.
Laser does not turn on
The batteries may be depleted. Ensure you have inserted 2 x AAA
batteries with a full charge.
Make sure the batteries are in the correct direction as indicated by the
engraving on the bottom metal plate inside the battery compartment.
The reference point will not change
The mode & reference button must be held down to change the
measuring reference point.
Err 16
The measurement is outside the lasers working range.
OPERATING MODES (CONTINUED)
Continuous Distance (Maximum)
2 Press the measuring button to
turn the laser point on. Align
the laser in position.
Note:
Ensure the desired
reference point is selected
1 Press the mode button until the continuous
max operating mode symbol is shown.
3 Press the measuring button a
second time to start measuring.
The largest distance so far will
display at the top
The current real time distance will
show at the bottom.
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
MAX
OFF
m
Min/Max
MIN
MAX
Continuous Distance (Minimum)
2 Press the measuring button to
turn the laser point on. Align
the laser in position.
Note:
Ensure the desired
reference point is selected
1 Press the mode button until the continuous
min operating mode symbol is shown.
3 Press the measuring button a
second time to start measuring.
The smallest distance so far will
display at the top
The current real time distance will
show at the bottom.
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
MIN
OFF
m
Min/Max
MIN
MAX
Warning
Read instruction manual
mW Milliwatt
Laser Light Laser Radiation
V
Volts
W
Watts
Direct current
dc/
Do not put in the rubbish
Regulatory Compliance Mark
(RCM)
Indoor use only
