LMR-025
4. OPERATING MODES
Measuring Areas
Measuring Volumes
Measuring a Single Distance
2 Press the measuring button to
turn the laser point on. Align
the laser in position.
Note:
Ensure the desired
reference point is selected
2 Press the measuring button to
turn the laser point on. Align
the laser in position.
Note:
Ensure the desired
reference point is selected
2 Press the measuring button to
turn the laser point on. Align
the laser in position.
Note:
Ensure the desired
reference point is selected
4 Press the measuring button
to turn the laser point on.
Position the laser and press
the measuring button again to
measure the width.
Note:
The area will be displayed
at the bottom in m
2
.
4 Press the measuring button
to turn the laser point on.
Position the laser and press
the measuring button again to
measure the width.
5 Press the measuring button
to turn the laser point on.
Position the laser and press
the measuring button again to
measure the height.
Note:
The volume will be displayed
at the bottom in m
3
.
1 Press the mode button until the area
operating mode symbol is shown.
1 Press the mode button until the volume
operating mode symbol is shown.
MORE OPERATING MODES OVER THE PAGE
1 This is the default operating mode when
the unit is switched on. If required, press
the mode button until no operating mode
symbol is shown.
3 Press the measuring button a
second time to take the length
measurement.
3 Press the measuring button a
second time to take the length
measurement.
3 Press the measuring button
a second time to take the
distance measurement.
Note:
The measurement will be
displayed on the digital display.
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
OF
F
m
Min/Ma
x
OFF
m
Min/Max
OFF
m
Min/Max
OFF
m
Min/Max
MIN
MAX
OFF
m
Min/Max
MIN
MAX
NO SYMBOL
