LCT-1805
Using the Auto-Levelling Function
1 Turn laser on or off by pressing
the on/off button at the top of
the unit.
3 If the laser is at an angle
greater than 4 degrees, the red
light at the top of the laser will
turn red and the laser line will
flash.
This indicates that the unit is
at an angle out of self auto-
levelling range.
Note:
Laser can also be turned
on, in auto-levelling mode
by using the auto-levelling
switch.
A red flashing light shown at the top of the unit will indicate that the
auto-levelling feature is turned off
A solid red light indicates that the unit is at an angle out of self auto-
levelling range.
A green light indicates the auto-levelling switch is turned on and
operating correctly.
2 Press the auto-levelling
switch left, into the
unlocked position and
then press the operating
mode button to achieve
the desired mode.
Note:
Ensure the laser is
level on tripod.
Disabling Auto-Levelling feature to Create an Angled Line
2 Turn the unit on using the
on/off switch, ensuring that
the auto-levelling switch is
in off position. Press the on/
off operating mode button
until desired laser mode is
achieved.
Note:
The indicator light will glow
red, indicating the auto-
levelling feature is in-active.
1 Attach the laser to the tripod
and adjust the tripod to the
desired height, angle and tilt.
