4. USING THE MOUNTING CLAMP
5. OPERATING THE LASER
OPERATION
Laser Operating Mode
Switching the Laser On and Off
1 Turn laser on or off by pressing
the on/off button at the top of
the unit.
Note:
Laser can also be turned
on, in auto levelling mode
by using the auto levelling
switch.
WARNING!
ENSURE LASER WINDOW IS NOT AT EYE
LEVEL WHEN OPERATING.
Cross Line
Horizontal Line
Vertical Line
The laser has 3 operating modes to assist in levelling as shown below.
1 To switch between these
modes, simply press the
on/off operating mode button
until the desired mode is
reached.
Attaching the Laser to the Mounting Clamp
Adjusting the Mounting Clamp
The mounting clamp allows you to attach the laser to a table or shelf by
clamping it in position.
1 Screw the laser clockwise onto
the mounting clamp threaded
rod.
1 Unlock the adjustment by
rotating the locking screw anti-
clockwise
2 Squeeze the 2 tabs
together to open the
clamp. Place the
clamp onto the table
or shelf and release.
2 Adjust the laser into the desired
orientation.
Note:
Ensure you lock in the
desired position by rotating the
locking screw clockwise.
