3. KEYLESS CHUCK
Installing a Drill Bit
Removing a Drill Bit
1 Rotate the chuck collar anti-
clockwise to open the chuck
1 Open the chuck by rotating the
chuck collar and remove the
drill bit.
3 Tighten the chuck by turning
clockwise.
2 Insert the drill bit,
making sure it
is centred in the
chuck.
4 Pull on the bit to
ensure it is firmly
secured.
CAUTION:
TO REDUCE THE RISK OF INJURY WE
RECOMMEND THE USE OF GLOVES WHEN HANDLING
DRILL BITS.
WARNING!
ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING ANY
OF THE FOLLOWING OPERATIONS.
2. BATTERY
Installing the Battery Pack
1 Slide the battery into the drill base until it clicks into place.
Note:
Once fully charged, the green LED light will be illuminated.
Removing the Battery Pack
1 Hold down the battery release
button and then slide the
battery out.
Charging the Battery Directly
2 The red LED light will
illuminate while charging.
1 Plug charging jack
directly into the
top of the battery
