background image

WARNING! 

Wear ear protectors when impact drilling 

Exposure to noise can 

cause hearing loss.

Use auxiliary handle(s), if supplied with the tool.

 Loss of control can cause 

personal injury.

Hold power tool by insulated gripping surfaces, when performing an operation 

where the cutting accessory may contact hidden wiring or its own cord. 

Cutting 

accessory contacting a “live” wire may make exposed metal parts of the power tool 

“live” and could give the operator an electric shock. 
Before drilling into walls, ceilings etc, ensure that there are no concealed power cables 

or pipes in the cavity.

WARNING! 

Some dust created by power sanding, sawing, grinding, 

drilling and other construction activities contain chemicals known to cause 

cancer, birth defects or other reproductive harm. Some examples of these 

chemicals are:

• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated timber
Your risk from exposure to these chemicals varies, depending on how often you do this 

type of work. To reduce your exposure to these chemicals: work in a well ventilated 

area and work with approved safety equipment, such as dust masks that are specially 

designed to filter out microscopic particles.

This appliance is not intended for use by young or infirm persons

 unless 

supervised by a responsible person to ensure that they can use the appliance 

safely. Young children should be supervised to ensure that they do not play with the 

appliance.

DRILL DRIVER SAFETY WARNINGS

WARNING!

 

Read all safety warnings and all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or serious injury. 

 

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers 

to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety 

a.  

 Keep work area clean and well lit

. Cluttered or dark areas invite accidents. 

b.  

 Do not operate power tools in explosive atmospheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks which may ignite the dust or fumes. 

c.  

 Keep children and bystanders away while operating a power tool.

 Distractions can cause you to lose 

control.

2. Electrical safety 

a.  

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power tools.

 Unmodified plugs and matching outlets will 

reduce risk of electric shock. 

b.    

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric shock if your body is earthed or grounded. 

c.    

Do not expose power tools to rain or wet conditions.

 Water entering a power tool will increase the 

risk of electric shock. 

d.  

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges or moving parts.

 Damaged or entangled cords increase 

the risk of electric shock. 

e.    

When operating a power tool outdoors, use an extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric shock. 

f.  

 If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) 

protected supply.

 Use of an RCD reduces the risk of electric shock. 

3. Personal safety 

a.  

 Stay alert, watch what you are doing and use common sense when operating a power tool. Do 

not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

 A 

moment of inattention while operating power tools may result in serious personal injury. 

b.  

Use personal protective equipment. Always wear eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce 

personal injuries. 

c.  

 Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on 

the switch or energising power tools that have the switch on invites accidents. 

d.    

Remove any adjusting key or wrench before turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may result in personal injury. 

e.    

Do not overreach. Keep proper footing and balance at all times.

 This enables better control of the 

power tool in unexpected situations. 

f.  

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away 

from moving parts.

 Loose clothes, jewellery or long hair can be caught in moving parts.

g.    

If devices are provided for the connection of dust extraction and collection facilities, ensure these 

are connected and properly used.

 Use of dust collection can reduce dust-related hazards.

4. Power tool use and care 

a.  

 Do not force the power tool. Use the correct power tool for your application. 

The correct power tool 

will do the job better and safer at the rate for which it was designed. 

b.    

Do not use the power tool if the switch does not turn it on and off.

 Any power tool that cannot be 

controlled with the switch is dangerous and must be repaired. 

c.  

 Disconnect the plug from the power source and/or the battery pack from the power tool before 

making any adjustments, changing accessories, or storing power tools.

 Such preventive safety 

measures reduce the risk of starting the power tool accidentally. 

d.    

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the 

power tool or these instructions to operate the power tool.

 Power tools are dangerous in the hands 

of untrained users. 

e.    

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and 

any other condition that may affect the power tool’s operation. If damaged, have the power tool 

repaired before use.

 Many accidents are caused by poorly maintained power tools. 

f.  

 Keep cutting tools sharp and clean.

 Properly maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control. 

g.    

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking 

into account the working conditions and the work to be performed. 

Use of the power tool for 

operations different from those intended could result in a hazardous situation. 

5. Battery tool use and care

a.

  Recharge only with the charger specified by the manufacturer. 

A charger that is suitable for one  

 

type of battery pack may create a risk of fire when used with another batery pack.

b.

   Use power tools only with specifically designated battery packs. 

Use of any other battery packs may  

 

create a risk of injury and fire.

c.

   When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,  

 

keys, nails, screws or other small metal objects, that can make a connection from one terminal to  

 another. 

Shorting the battery terminals together may cause burns or a fire.

d.

   Under abusive conditions, liquid may be ejected from the battery; aviod contact. If contact    

 

accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. 

Liquid  

 

ejected from the battery may cause irritationor burns.

6. Service 

a.  

 Have your power tool serviced by a qualified repair person using only identical replacement parts. 

This will ensure that the safety of the power tool is maintained.

GENERAL POWER TOOL SAFETY WARNINGS

ELECTRICAL SAFETY

 

WARNING! 

When using mains-powered tools, basic safety precautions, including the 

following, should always be followed to reduce risk of fire, electric shock, personal injury and 

material damage. 

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before 

operating the tool. 

Save these instructions and other documents supplied with this tool for future reference.
The manufacturer cannot accept any liability for damage or accidents which arise due to a failure to follow these 
instructions and the safety information.
This product has been designed for 230V and 240V only. Always check that the power supply corresponds to 

the voltage on the rating plate.
Note: The supply of 230V and 240V is interchangeable for Australia and New Zealand.

This charger is double insulated therefore no earth wire is required.

The power supply for this product should be protected by a residual current device (rated at 30mA or less). A 

residual current device reduces the risk of electric shock.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard.

Note:

 Double insulation does not take the place of normal safety precautions when operating this tool. The 

insulation system is for added protection against injury resulting from a possible electrical insulation failure  

within the tool.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the 

extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not 

suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric 

shock.

Summary of Contents for LCD-2050









Reviews: