1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
ON
I
0
IGP 2500
AC 240V
DISPLAY METER
RATED POWER 2.2kW
MAX. POWER 2.5kW
OFF
DC PROTECTOR
+
DC 2V 3.3A
-
1. Frame
2. Choke
3. Recoil Starter
4. Fuel Gauge
5. Fuel Tank Cap
6. Control Panel
7. Oil Dipstick
8. Oil Fill Port
9. Transport Handle
10. Air Filter
11. Fuel Tap
12 Engine On/Off Switch
13. Display Meter
14. AC Socket x 2
15. AC Power Switch
16. Status LEDs
17. DC Overload Reset
18. 12Volt DC Outlet
19. Grounding Terminal
INVERTER GENERATOR
KNOW YOUR PRODUCT
1. LUBRICATION
SETUP & PREPARATION
1
2
3
4
5
6
9
7
15
13
14
8
10 11
The generator is shipped without oil and must be filled before starting.
Oil sump capacity is 600ml. Refer to below instructions for details.
Note:
The generator has 2 oil filler holes for easier access, however
only the oil plug towards the front features a dipstick for checking the
level.
Checking the Oil
2. Remove the dipstick, and
wipe with a clean rag. Check
the oil level by inserting
the dipstick in the filler hole
without screwing it in and
then removing it again.
3. If the oil level is below the
end of the dipstick, using
the oil filler bottle, refill until
it registers on the halfway
mark of the dipstick. Use
premium quality 4-stroke
engine oil. Recommended
SAE30 or 15W40 for
most climate conditions in
Australia.
Upper
level
allowed
12
20
21
TOOLS & ACCESSORIES
22
23
24
20. Oil Filler Bottle
21. Battery Charging Cable
22. Spark Plug Wrench
23. Spare Spark Plug
24. Generator Oil
Upper
level
allowed
Note:
The Oil Alert LED will automatically illuminate before the oil level
falls below the safe limit. However, to avoid the inconvenience, it is still
advisable to visually inspect the oil level regularly.
1. Be sure to check that the generator is on a level surface with the
engine stopped.
16 17
19
18
