1
DTP-065
7. STOPPING THE ENGINE
6. STARTING THE ENGINE
1 Move the fuel tap
clockwise to the open
position(“O”).
1 Decrease the speed of
the engine by moving
the throttle up towards
the stop position and
allow to idle for 2 mins.
2 Unlock the throttle and
push downward to the start
position. Lock the throttle in
place.
2 Move the throttle to the stop
position and rotate the fuel
tap anti-clockwise to the shut
position (“S”).
Note:
Allow the engine to cool
down before moving or
storing the pump.
5 Grip the recoil starter and
pull the recoil starter rapidly.
If the pump does not start,
repeat steps 4-5.
3 Pull the recoil starter
out slowly until you feel
resistance then return
the recoil starter back
slowly.
4. Push the
decompression lever all
the way down.
6 Once started move
the throttle lever to the
centre throttle position
(in the middle of Stop
and Start) and allow to
idle for 3 minutes.
CAUTION:
SUDDENLY STOPPING THE ENGINE WILL
CAUSE AN ABNORMAL INCREASE OF TEMPERATURE
WHICH COULD RESULT IN DAMAGE TO THE ENGINE.
