3. CONTROLS
2. DuST ExTRACTION ADAPTOR
OPERATION
WARNING!
ThE DUST ThAT IS pRODUCED WhILE
WORkING CAN bE DETRIMENTAL TO hEALTh,
INfLAMMAbLE OR ExpLOSIvE. SUITAbLE SAfETy
MEASURES ARE REqUIRED. USE SUITAbLE DUST
ExTRACTION AND WEAR A DUST RESpIRATOR.
1. Slide the dust extraction adaptor into the dust extraction port.
2. Connect a dust
extraction hose to
the dust extraction
adaptor.
3. Run the dust extraction
device while operating the
delta sander.
On/ Off Switch
To turn on, push the ON/OFF
switch forward to “I” position.
To turn off, push the ON/OFF
switch backward to “0” position.
variable Speed
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
1. Turn the delta sander on.
2. Scroll through variable
speed dial to select desired
speed setting.
Note:
The higher the number on the variable speed dial,
the faster the oscilation frequency of the delta sander.
Low
high
