Ozito CDR-018, Instruction Manual

Page: 4 / 18

intRoduction
3
Congratulations on purchasing an Ozito Cordless Hammer
Drill. We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years. Your
Cordless Hammer Drill CDR-018 has been designed to drill
masonry, metal, plastic and for screw driving. It is intended for
DIY use only.
electRical Safety
WaRninG!
When using mains-powered equipment, basic safety precautions,
including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage.
Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference.
This tool is double insulated in accordance with AS/NZS 60335-1; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced by a qualified electrician or a
power tool repairer in order to avoid a hazard.
note: Double insulation does not take the place of normal safety precautions when
operating this tool. The insulation system is for added protection against injury result-
ing from a possible electrical insulation failure within the tool.
using an extension lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of
an extension lead not suitable for the power input of the tool or which is damaged or
defective may result in a risk of fire and electric shock.
It is recommended that the extension lead is a maximum of 25m in length. Do Not
use multiple extension leads