![background image](http://html1.mh-extra.com/html/ozito/cdr-018/cdr-018_instruction-manual_1666272014.webp)
HammeR dRill opeRation (cont.)
13
Wood drilling
Mark the place where you want to drill with a punch or a nail.
To avoid splintering on breakthrough, either clamp a piece of scrap wood to the
back of your workpiece or continue the hole from the back of the wood when
the drill bit first breaks through.
masonry drilling
Mark the place where you want to drill.
Only use carbide tipped drill bits.
Use the drill only in the forward position.
Hold the drill firmly and place the bit at the point to be drilled.
Do not force the drill. Allow the drill and the bit to do the work.
If the bit jams in the work piece or stalls, stop the tool immediately. Remove the
bit from the work piece and determine the reason for jamming.
led lights
The drill has 1 LED light (5) built into the unit. The LED
light is located above the variable speed switch.
The LED light (5) turns on automatically when you
depress the variable speed trigger (6) (Fig. 10).
The LED light (5) illuminates dark areas in tight
corners to assist with drilling and screw driving.
This helps achieve a more accurate result in your
workpiece.
1.
2.
1.
2.
3.
4.
5.
6.
1.
2.
Fig. 10
Summary of Contents for CDR-018
Page 16: ...DESCRIPTION OF SYMBOLS 15...