Ozito CDR-013, Instruction Manual

Page: 11 / 18

inStallinG oR RemoVinG tHe BatteRy (cont.)
10
Getting the Best performance from the Battery
The length of service from each charging cycle will depend on the type of work you
are doing.
To obtain the longest possible battery life, we suggest the following:
Store and charge your battery (7) in a cool area. Temperatures above or below
normal room temperature will shorten battery life.
Never store batteries in a discharged condition. Recharge them immediately
after they are discharged.
All batteries gradually lose their charge. The higher the temperature the
quicker they lose their charge. If you store your drill for long periods of time
without using it, recharge the batteries every month or two. This practice will
prolong battery life.
It is important to understand the functions of the various controls. Please see below
how and when to use the variable speed trigger, forward/reverse lever and torque
control.
Variable Speed trigger
Turn the drill on by depressing the variable speed
trigger (5).
To turn the drill off release the variable speed
trigger (5) (Fig. 4).
The speed can be varied from 0 to maximum,
depending on the pressure applied to the variable
speed trigger (5). This way you can select the best
possible speed for the job required.
changing the direction of Rotation
The direction of rotation can be changed with the
forward/reverse lever (4). This is located above the
variable speed trigger (5) (Fig. 5).
To select the forward drilling position, push the
forward/reverse lever (4) hard left. To select the
reverse drilling position, push the forward/reverse
lever (4) hard right.
The variable speed trigger (5) can be locked off by
pushing the forward/reverse selector (4) into the
middle of both the forward and reverse positions.
caution: Do not change the direction of rotation while the keyless chuck (1) is
in motion.
1.
2.
3.
1.
2.
3.
1.
2.
3.
dRill dRiVeR opeRation
Fig. 4
Fig. 5