Blowing
The blower can be used to
clean corners, fences, walls or
beneath cars.
Hold the blower firmly, turn
the trigger switch on, point the
jet of air in front of you and
move forward slowly. Move the
blower from side to side, with
the tube several inches above
the ground.
Be careful where you point the
jet of air as it can move heavy
material and cause injury or
damage to bystanders.
NOTE.
Be aware of other
people and animals in the area
where you are to be operating
the blower.
NOTE.
Avoid collisions with hard objects which could damage your
machine.
BLWT-2000
3. USING THE BLOWER
4. GENERAL MAINTENANCE
MAINTENANCE
WARNING!
DO NOT USE THE BLOWER WITH ANY
TYPE OF ACCESSORY OR ATTACHMENT. SUCH
USAGE MIGHT BE HAZARDOUS.
• Keep air intake clean and air vents free of debris to avoid overheating
the motor.
• Do not use cleaning agents to clean the plastic parts of the tool.
A mild detergent on a damp cloth is recommended. Water must never
come into contact with the tool.
• If the blower vibrates abnormally, stop motor immediately. Abnormal
vibration usually indicates a mechanical problem continued operation
could lead to injury or damage.
• No lubrication is necessary as the motor is equipped with lifetime-
lubricated bearings.
Note:
Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the tool by an unauthorised person or by
mishandling of the tool.
WARNING!:
BEFORE CLEANING YOUR BLOWER
OR CARRYING OUT ANY MAINTENANCE
PROCEDURE, MAKE SURE THAT THE MOTOR IS OFF
AND THE BLOWER IS DISCONNECTED FROM THE
POWER SUPPLY TO PREVENT ACCIDENTAL STARTING.
WARNING!
DO NOT SWITCH THE MACHINE ON
IN ENCLOSED OR POORLY VENTILATED SPACES
OR IN THE PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES AND POWDERS.
