![background image](http://html1.mh-extra.com/html/ozito/blwt-2000/blwt-2000_instruction-manual_1666179003.webp)
Using the extension cord retainer
The cord retainer is used to “anchor” an extension cord when it is
connected to the power lead of the tool. It prevents the extension cord
from being accidentally disconnected from the blower’s power cable or
shaken loose during use. It should be used at all times.
1. Make a loop in the end of the
extension cord (socket end of cord)
and pass the loop though the hole
in the cord retainer as shown.
2. Hook the loop over the cord
retaining hook. Pull the extension
cord to secure it in position over the
cord retaining hook as shown.
3. Connect the extension
cord to the power cord.
Route the power and
extension cord away
from the work area to
prevent contact with the
blower.
NOTE:
Always use an approved extension cord suitable for the power
input of this tool.
Turning ON
To turn the blower on, push the
switch to the (1) (low speed)
position.
To increase speed, push the
switch to the (2) (high speed)
position.
Turning OFF
To turn the blower off, push the
switch to the (0) off position.
2. ON/OFF 2-SPEED SWITCH
OPERATION
2
2
WARNING!
THE POWER SUPPLY FOR THIS
PRODUCT SHOULD BE PROTECTED BY A
RESIDUAL CURRENT DEVICE RATED AT 30MA OR LESS.
2