![background image](http://html1.mh-extra.com/html/ozito/ags-4000/ags-4000_instruction-manual_1666372002.webp)
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
2. Tighten guard
bolt.
1. Spindle Lock
2. Adjustable Safety Guard
3. Sure Grip Handle
4 Lock On Slide Switch
ANGLE GRINDER
KNOW YOUR PRODUCT
1. SIDE HANDLE & GUARD
Side Handle
The side handle can be fitted on either side, or on top of your
grinder. The correct position will be determined by your preferred
hand and the operation being performed.
Removing
2. Remove the side
handle.
5. Pin Wrench
6. Hex Key
7. Inner Flange
8. Outer Flange
9. Metal Grinding Disc
ACCESSORIES
SETUP & PREPARATION
Safety Guard
The safety guard should be used at all times whilst operating the
angle grinder.
Attaching
Removing
3. Loosen guard bolt.
Attaching
1. Firmly attach the
side handle in the
desired position on
the grinder.
1. Loosen guard bolt, align tabs and
rotate guard to the required position.
4. Align tabs on the guard with slots on the guard collar. Remove
guard.