Attaching The Support Foot
1. Place the supporting foot and then a small
washer onto the small bolt. Thread this
through the hole in the foot bracket.
2. Thread the other small washer and then
the spring washer onto the bolt. Secure the
assembly with the small nut.
Attaching The Wheels
1. Place the large bolt through
the wheel and a large
washer. Then slide this
through the hole in the
wheel bracket. Place a large
washer then a spring washer
onto the bolt and secure this
with a large nut.
2. Repeat step 1 to fit the second wheel on the opposite side of the
tank.
Connecting An Air Hose to the Compressor
1. Pull back the sleeve on the
regulated pressure outlet of
the compressor and insert
the male Nitto end of the air
hose..
2. Release the sleeve; the Nitto
coupling should click into
place.
3. Check that the fitting is secure by tugging gently on the
connector. If the hose detaches, repeat steps 2 & 3, pushing the
Nitto connector firmly into the outlet.
Disconnecting Air Tools
1. To remove an air tool from the unit, retract the sleeve on the
female Nitto fitting and disconnect the air hose from the air
compressor.
2. Repeat the same procedure
with the air tool and air
hose.
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4
6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4
6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4
6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4
6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
WARNING!
ENSURE YOU HAVE A FIRM GRIP ON THE
AIR HOSE WHEN CONNECTING/DISCONNECTING IT
FROM THE AIR COMPRESSOR, AS PRESSURISED AIR
IN THE TANK MAY CAUSE IT TO WHIP AROUND AND
INFLICT INJURY OR DAMAGE.
