1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
5. Fasten the fuel tank
cap and clean any
spillage.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1 Choke control
2 Exhaust
3 Chain Drive Cover
4 Throtle Safety Lock
5 Throttle Trigger
6 Chain Tension Screw
7 Chain Drive Cover Nut
8 On/Off Switch
9 Guide Bar
10 Chain
11 Chain Brake
12 Bucking Spikes
13 Fuel Tank Cap
14 Chain Bar Oil Cap
15 Priming Bulb
16 Side Operating Handle
17 Recoil Starter
18 Carburettor Adjustment Screws
19 Filter Cover
20 Filter Cover Knob
1: FUEL
• Only use oil that is expressly labelled for use with air-cooled 2-stroke engines.
• Use unleaded petrol with a minimum Octane number of 89.
2. Fill with 2-stroke oil up
to oil line.
1. Fill with unleaded petrol
up to fuel line.
WARNING!:
Petrol is very flammable. Avoid smoking or
causing any sparks or flames near fuel. Make sure that
you stop the motor and allow it to cool before refuelling
the chainsaw. Select an open outdoor area for fuelling
and move at least 3m away from the fuelling point before
starting the motor.
PETROL CHAINSAW
500ml
Regular
Unleaded
Fuel tank capacity: 200ml
3. Shake vigorously and
ensure thorough mix.
4. Remove
YELLOW
fuel tank cap and fill the
fuel tank to about 80%
of its capacity with the
fuel mix.
